Shutdown Timer — SDT1220-046
January 23, 2026
Isolated Adapters —DT19-12I-4382
January 23, 2026
Isolated Adapters —DT1935I-3980
The Lind DT1935I DC/DC Power Adapter is designed to power your DT Research 390 and to charge its internal battery from an 12-32 VDC power source.
– Isolated
– 12-32 VDC
– Bare Wire 72″ Input Cable
– 4.75×1.7 72″ Output Cable
Compatibility
DT RESEARCH DT390
Technical information
|
Input Voltage:
|
12-32 VDC
|
|
Output Voltage:
|
19 VDC
|
|
Output Current:
|
3.5 amps
|
|
Input 1 Connector 1:
|
S/T
|
|
Input 1 Connector 2:
|
S/T
|
|
Output 1 Connector 1:
|
2.1mm
|
|
Output 1 Connector 2:
|
1.7 x 4.75mm .410” Long
|
|
Input 1 Length:
|
72 Inches
|
|
Output 1 Length:
|
72 Inches
|
|
HW Fuse:
|
12A
|
|
Size:
|
9.2" x 3.0" x 1.2"
|
|
Weight:
|
2.2 lbs
|
Related products
-
Shutdown Timer — LPT1230-072
The Lind LPT1230-072 DC/DC Power Adapter is designed to power your Low Profile Timer from an 11-16 VDC power source.
– 11-16 VDC
-
Shutdown Timer — LPT1230-052
The Lind LPT1230-052 Low Profile Shutdown Timer protects your vehicle’s battery from over-discharge and equipment from low voltage and high voltage damage. This device turns off electrical loads at a preset time after the car engine is shut down. This timer provides the same protective functions as Lind’s standard Shutdown Timers but comes with a reduced height profile for installation into more compact areas.
– 11-16 VDC
– More compact design via reduced height profile
– Adjustable shut down delay time (from 5 seconds to 4 hours, factory set to 2 hours)
– Low voltage shut down at 10.5 Vdc
– High voltage shut down at 18 Vdc with auto reset
– Loads up to 30 amps -
Auto Adapters — GE1950-1276
The Lind GE1950-1276 DC/DC Power Adapter is designed to power your Getac-compatible laptop computer and to charge its internal battery from an 11-16 VDC power source. The adapter supplies current and voltage levels as required by the laptop.
– Cig. Plug 36″ Input Cable
– Kycon 4 pin 36″ Output Cable
– Low Input Voltage Disconnect
– High Input Voltage Disconnect
– Output Short Circuit Protection
– Output Overcurrent Protection
– Internal Over Temperature Protection
