-
MILTECH 309
The MILTECH309 is an eight 10/100Mbps port Fast Ethernet switch on board (ESoB).
The MILTECH309 is an eight 10/100Mbps port Fast Ethernet switch on board (ESoB). With a conformal coating and built-in board-to-board connectors.
-
MILTECH 9028
The MILTECH 9028 is a 2U rack-mountable Ethernet switch with Layer 3 Dynamic routing functionality
The MILTECH 9028 is a 2U rack-mountable Ethernet switch with Layer 3 Dynamic routing functionality. With 24 triple-speed (10/100/1000Mbps) ports and up to 4 10Gbps fiber optic ports
-
Output Cable – CBLOP-F00101
2.1 snap, 72”, 18awg, 2.5mm SM 18V TVS R/A RoHS Compliant
-
Output Cable – CBLOP-F00331
2.1 snap, 36” 4C-20awg Kycon 4P RoHS Compliant
-
Output Cable – CBLOP-F00691
2.1 snap, 36”, 20awg, 2.5mm SM 18V TVS R/A RoHS Compliant
-
Output Cable – CBLOP-F01620
2.1mm snap, 36”, 18awg, 2.5mm SM R/A .500”, RoHS Compliant
-
Output Cable – CBLPW-F21925
2.1 snap, 37”, 20awg, 2.5mm SM R/A RoHS Compliant
-
Output Cable CBLOP-F00692
2.1 snap, 36”, 16awg, 2.5mm SM 18V TVS R/A RoHS Compliant
-
Shutdown Timer — LPT1230-052
The Lind LPT1230-052 Low Profile Shutdown Timer protects your vehicle’s battery from over-discharge and equipment from low voltage and high voltage damage. This device turns off electrical loads at a preset time after the car engine is shut down. This timer provides the same protective functions as Lind’s standard Shutdown Timers but comes with a reduced height profile for installation into more compact areas.
– 11-16 VDC
– More compact design via reduced height profile
– Adjustable shut down delay time (from 5 seconds to 4 hours, factory set to 2 hours)
– Low voltage shut down at 10.5 Vdc
– High voltage shut down at 18 Vdc with auto reset
– Loads up to 30 amps -
Shutdown Timer — LPT1230-072
The Lind LPT1230-072 DC/DC Power Adapter is designed to power your Low Profile Timer from an 11-16 VDC power source.
– 11-16 VDC
-
Shutdown Timer — SDT1220-046
The Lind SDT1220-046 Shutdown Timer is designed to protect your vehicle’s battery from over discharge. This Lind Ruggedized Shutdown Timer/Relay Driver turns off electrical loads after the vehicle’s ignition is shut off. Used as a Shutdown Timer, this unit alone can be used with loads up to 20A. As a Relay Driver/Shutdown Timer, it will drive relays up to 200 amps.
– 11-16 VDC
– Epoxy sealed electronics for under-the-hood installation
– Factory programmed – 10 Min. to 2 Hr. Delayed Shut Off
– Automatic low voltage shut off
– No adjustments and installation is easy
– Will drive 40, 80 150, 200 Amp external relays -
SLK-880-FSR
Backlit Military Keyboard
The SLK-880-FSR exceeds NEMA 4X requirements and is fully-submersible, meeting IP68 specifications. Unique features of the SLK-880-FSR include a conductive plastic case, adjustable green backlighting that is also available in a night vision (NVIS) compatible configuration, and an integrated Interlink Electronics Force Sensing Resistor (FSR) pointing device. Successful drop tests on the keyboard have been completed at 2.0 meters on concrete, and the cable strain relief exceeds 25 pound pull limits. In addition, the SLK-880-FSR is designed to meet MIL-STD-461G.
Features:
Adjustable backlighting
Conductive plastic case
Integrated FSR pointing device
Optional NVIS Compliant – Green B backlighting (NVIS: SLK-880-FSR-USB-NVIS)
