AC Adapter – AC121-GE01
March 9, 2026
AC Adapter – AC91-GE
March 9, 2026
AC Adapter – AC160-VS
110-240VAC, 160W AC Adapter Video Scout
Compatibility
Technical information
|
Input Voltage:
|
110-240 VDC
|
|
Output Voltage:
|
20 VDC
|
|
Output Current:
|
8.00 amps
|
|
Input 1 Connector 1:
|
NEMA 5-15P
|
|
Output 1 Connector 2:
|
IEC 60320/C13
|
|
Output 1 Connector 2:
|
Fischer 4P
|
|
Input 1 Length:
|
72 Inches
|
|
Weight:
|
2.3 lbs
|
Related products
-
Isolated Adapters —DT1935I-3980
The Lind DT1935I DC/DC Power Adapter is designed to power your DT Research 390 and to charge its internal battery from an 12-32 VDC power source.
– Isolated
– 12-32 VDC
– Bare Wire 72″ Input Cable
– 4.75×1.7 72″ Output Cable -
Isolated Adapters — GE1950I-4315
The Lind GE1950I-4315 DC/DC Power Adapter is designed to power your Getac-compatible laptop computer and to charge its internal battery from an 12-32 VDC power source. The adapter supplies current and voltage levels as required by the laptop.
– Isolated
– Bare Wire 72″ Input Cable
– Kycon 4 pin 36″ Output Cable
– 5.5×2.5 36″ Output Cable
– Low Input Voltage Disconnect
– High Input Voltage Disconnect
– Output Short Circuit Protection
– Output Overcurrent Protection
– Internal Over Temperature Protection -
Shutdown Timer — SDT1220-046
The Lind SDT1220-046 Shutdown Timer is designed to protect your vehicle’s battery from over discharge. This Lind Ruggedized Shutdown Timer/Relay Driver turns off electrical loads after the vehicle’s ignition is shut off. Used as a Shutdown Timer, this unit alone can be used with loads up to 20A. As a Relay Driver/Shutdown Timer, it will drive relays up to 200 amps.
– 11-16 VDC
– Epoxy sealed electronics for under-the-hood installation
– Factory programmed – 10 Min. to 2 Hr. Delayed Shut Off
– Automatic low voltage shut off
– No adjustments and installation is easy
– Will drive 40, 80 150, 200 Amp external relays
