Isolated Adapters —DT1935I-3980
January 23, 2026
Auto Adapters — MS1555-5287
January 23, 2026
Isolated Adapters —DT19-12I-4382
The Lind DT19-12I-4382 DC/DC Power Adapter is designed to power your DT Research & Zebra Printer and to charge its internal battery from a 20-60 VDC power source.
– Isolated
– 20-60 VDC
– Bare Wire 72″ Input Cable
Compatibility
DT RESEARCH DT313
DT RESEARCH DT398
DT RESEARCH DT522
Technical information
|
Input Voltage:
|
20-60 VDC
|
|
Output Voltage:
|
19 VDC
|
|
Output Current:
|
5 amps
|
|
Input 1 Connector 1:
|
S/T
|
|
Input 1 Connector 2:
|
S/T
|
|
Input 1 Length:
|
72 Inches
|
|
Size:
|
9.2" x 3.0" x 1.2"
|
|
Weight:
|
2.5 lbs
|
Related products
-
Shutdown Timer — SDT1220-046
The Lind SDT1220-046 Shutdown Timer is designed to protect your vehicle’s battery from over discharge. This Lind Ruggedized Shutdown Timer/Relay Driver turns off electrical loads after the vehicle’s ignition is shut off. Used as a Shutdown Timer, this unit alone can be used with loads up to 20A. As a Relay Driver/Shutdown Timer, it will drive relays up to 200 amps.
– 11-16 VDC
– Epoxy sealed electronics for under-the-hood installation
– Factory programmed – 10 Min. to 2 Hr. Delayed Shut Off
– Automatic low voltage shut off
– No adjustments and installation is easy
– Will drive 40, 80 150, 200 Amp external relays -
Output Cable – CBLOP-F00331
2.1 snap, 36” 4C-20awg Kycon 4P RoHS Compliant
-
Auto Adapters — ZE1235I-4424
The Lind ZE1235I-4424 DC/DC Power Adapter is designed to power your Zebra Tablet Device from a 20-60 VDC power source.
– 20-60 VDC
– Bare Wire 72″ Input Cable
– 2.1mm Snap-In 72″ Output cable
