AC/Auto Adapter ACDC1650-1746
January 27, 2026
Output Cable – CBLOP-F01620
January 28, 2026
Output Cable CBLOP-F00692
2.1 snap, 36”, 16awg, 2.5mm SM 18V TVS R/A RoHS Compliant
Compatibility
Technical information
|
Output 1 Connector 1:
|
2.1mm
|
|
Output 1 Connector 2:
|
2.5mm SM 18V TVS
|
|
Output 1 Length:
|
36 Inches
|
|
Weight:
|
.35 lbs
|
Related products
-
Shutdown Timer — LPT1230-052
The Lind LPT1230-052 Low Profile Shutdown Timer protects your vehicle’s battery from over-discharge and equipment from low voltage and high voltage damage. This device turns off electrical loads at a preset time after the car engine is shut down. This timer provides the same protective functions as Lind’s standard Shutdown Timers but comes with a reduced height profile for installation into more compact areas.
– 11-16 VDC
– More compact design via reduced height profile
– Adjustable shut down delay time (from 5 seconds to 4 hours, factory set to 2 hours)
– Low voltage shut down at 10.5 Vdc
– High voltage shut down at 18 Vdc with auto reset
– Loads up to 30 amps -
Shutdown Timer — SDT1220-046
The Lind SDT1220-046 Shutdown Timer is designed to protect your vehicle’s battery from over discharge. This Lind Ruggedized Shutdown Timer/Relay Driver turns off electrical loads after the vehicle’s ignition is shut off. Used as a Shutdown Timer, this unit alone can be used with loads up to 20A. As a Relay Driver/Shutdown Timer, it will drive relays up to 200 amps.
– 11-16 VDC
– Epoxy sealed electronics for under-the-hood installation
– Factory programmed – 10 Min. to 2 Hr. Delayed Shut Off
– Automatic low voltage shut off
– No adjustments and installation is easy
– Will drive 40, 80 150, 200 Amp external relays -
Isolated Adapters —DT1935I-3980
The Lind DT1935I DC/DC Power Adapter is designed to power your DT Research 390 and to charge its internal battery from an 12-32 VDC power source.
– Isolated
– 12-32 VDC
– Bare Wire 72″ Input Cable
– 4.75×1.7 72″ Output Cable
